sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586 7600 ? fax (631) 242 9798 ? ? world wide web - h ttp://www.sensitron.com ? e-mail address - sales@sensitron.com ? SEN-5282 technical data part number SEN-5282, rev c high pulse power mil-std-1275 transzorb application: ? +28v dc systems ? allows the use of 55v high efficiency fet ? increase system reliability through el iminating avalanche fet operation ? clamping below 55v dc for both 100v and 250v pulse ? high pulse power capability protection level: mil-std-1275 compliant; 100v surge withst anding with 0.5-ohm source impedance non-hermetic version rating condition minimum maximum units peak pulse power dissipation @ 25 0 c, 1ms - 60 kw steady state power dissipation @ 25 0 c - 40 watts t clamping 0 volts to v (br) - < 1x 10 ?8 seconds operating & storage temp. - -55 + 150 0 c part number reverse stand-off voltage v wm (volts) maximum reverse leakage @ v wm i d ( a) minimum breakdown voltage @ 10 ma v (br) (volts) maximum clamping voltage @ i pp v c (volts) maximum peak pulse current i pp (amps) SEN-5282 33 25 36.7 49 120
sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586 7600 ? fax (631) 242 9798 ? ? world wide web - h ttp://www.sensitron.com ? e-mail address - sales@sensitron.com ? SEN-5282 technical data part number SEN-5282, rev c disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns.
|
